Package Includes: High pressure aeroponic manifold with booster pump, accumulator tank & solenoid valve, (4) nozzles, stainless steel pipe and push lock fittings. Product includes (4) spray heads with Tefen conical nozzle with stainless steel nozzle filter- 200 mesh, nozzle tee 3/8", (4) rubber grommets. (1) push lock Tee 3/8in, (4) push lock elbows 3/8in, (1) push lock 3/8" to 1/2" M-NPT to attach to your setup. Includes (2) 11"L- 3/8" ss304 stainless steel pipes. (7) 3"L- 3/8" ss304 pipes. (1) 6.5"L- 3/8" ss304 pipe, two 12 volt adapters are included, (1) 20"x30" 27 gal. tote (aeroponic chamber), a 15"x20" tote (mixing reservoir), (6) 2" plant cups with (6) neoprene clone colars. Nozzles will produce water droplets in the 30-80 micron range, operates at pressures ranging from 30-125PSI. What is NOT included: Standard wire rack. (2) timers. (to run pump and solenoid valve at separate intervals)
Let me know if you want 3 plant sites (flowering configuration), 6 plant sites or 10 plant sites (propagation/cloning configuration). The lids are made to order.
Note: this design only requires the manifold on one side. The 120 degree spray cone of the nozzles ensures all plant sites get adequate water. If you want a custom manifold on both sides it requires two pump assemblies and two manifolds so it will naturally be double the cost. Message me if you want me to send a custom offer. This listing is for a standard 'one sided' manifold shown.
This is suitable for Flowering cycle and clones at any stage. If you want different # of plant sites let me know and I can add more holes and cups. If you want to order more than one or a commercial setup please send me a PM and I can send an offer. Let me know if you want any custom designs done, I design and build all my own systems and used to be design lead at a major indoor ag company. I can do any scale commercial or hobby setup.
PLEASE NOTE: ANY USE OF THIS IS COMPLETELY AT YOUR OWN RISK, IT IS HIGH PRESSURE AND REQUIRES EXPERIENCE WITH PLUMBING. THE UNIT YOU ARE BUYING IS THE ONE IN THE VIDEO AND IT HAS BEEN TESTED. THIS UNIT IS A FUNCTIONAL PROTOTYPE.If it is leaking shut it off immediately to avoid injury or damage. Redo teflon tape and tighten fittings where leak is and wait for the system to completely dry. I will include a installation operation and maintenance manual.Benefits to high pressure aeroponics include:

• The plants will have more consistent results

• Less water and nutrient usage and waste

• Plants less heavy in nutrients they don't need

• Less diseases and root rot

• Oxygenation of the nutrient solution